BAS Custom Designed and Assembled Fill Panels

The BAS-5000-S/S-R panel filling station is designed for simple SCBA or SCUBA filling. This system offers the operator convient filling and can be confured to fill either 2216, 3000 or 4500 PSIG SCBA and SCUBA units as a dedicated system. the BAS-5000-S/S-R can be configured for either panel or wall mounting.

Parts for the BAS-5000-S/S-R

1. and 2. 6000 PSIG, 4" Panel Mounted Gauges
1. Regulator Inlet pressure from compressor or storage
2. Regualtor Outlet pressure to SCBA or SCUBA

3. 6000 PSIG Multi-Turn Valve, Isolates Panel from Gas Supply
4. 5000 PSIG, Venting Regulator
5. JIC Outlet Fittings for SCBA or SCUBA Filler Assembles

* This unit also includes a built in gas flow restrictor limiting fills to 300-600 psig / minute and One SCBA or SCUBA whip assembly (additional whips available).

Breathing Air Systems can design and construct Air Control Panels to meet your specific requirements.

Regulated Cylinder Charging Panel
BAS-5000-S/S-R

 

 

The BAS-5000-DRC Panel as Pictured is constructed on polished stainless steel and can be configured for either a panel or wall mounting.

Parts for the BAS-5000-DRC

1. to 4. 6000 PSIG, 2.5" Panel Mounted Bank Gauges
5. to 8. & 11. 6000 PSIG, Multi-Turn Valves
9. 6000 PSIG, 4" Panel Mounted Gauge
10. 5000 PSIG, Venting Regulator
12. JIC Outlet Fittings for SCBA or SCUBA Filler Assembles

* This unit also includes a built in gas flow restrictor limiting fills to 300-600 psig / minute and One SCBA or
SCUBA fill whip assembly (additional whips available).

Breathing Air Systems can design and construct Air Control Panels to meet your specific requirements.

Deluxe Regulated Cascading Fill Panel
BAS-5000-DRC

 

The 1-Diver Control Panel is enclosed in a high impact plastic case with an O-ring seal for watertight integrity.

The case dimensions are:20 1/2”L x 16 3/4”W x 8 1/2”D.

This lightweight, portable panel controls diver air from two HP air supplies of up to 5000psi and one LP air supply of 250 psi.
A Deluxe Hand-Loaded Self-Venting regulator allows the tender to track the diver's air supply to compensate for increasing bottom pressure. Complete with pneumo gauges to monitor diver's depth.

Single Diver Portable Air Panel
single diver

The 2-Diver Control Panel is enclosed in a high-impact plastic case with an O-ring seal for watertight integrity.

The case dimensions are:20 1/2”L x 16 3/4”W x 8 1/2”D.

This lightweight, portable panel controls diver air from two HP air supplies of up to 5000 psi
and one LP air supply of 250 psi.
A Deluxe Hand-Loaded Self-Venting regulator allows the tender to track the diver's air supply to compensate for increasing bottom pressure.
Note: Also available with a double regulator or two regulators with two cross connections between regulators.

Double Diver Portable Air Panel
double diver
home  |  about us  |  FAQs  |  products  |  services  |  catalogue  |  contact  
site map  |  privacy policy  
This page last updated: 28 October 2004  
The entire contents of this web site are © 2004 Breathing Air Systems  
All Rights Reserved